Rohde & Schwarz R&S FSP Series, Operating Manual

Page: 470 / 796

R&S FSP Remote Control – Description of Commands
CALCulate Subsystem
6.76 Operating Manual 1164.4556.12 - 06
CALCulate<1|2>:MARKer<1...4>:FUNCtion:POWer:STANdard:CATalog?
This command returns all predefine ACP standards and all user standards. The numeric suffixes at
MARKer are irrelevant for this command.
Example:
"CALC:MARK:FUNC:POW:STAN:CAT?”
'get all available ACP standards
Characteristics: *RST value:-
SCPI: device-specific
Mode: A
CALCulate<1|2>:MARKer<1...4>:FUNCtion:POWer:STANdard:DELete <name>
This command removes the ACP user standard <name>. It is not possible to remove predefine ACP
standards. The numeric suffixes at MARKer are irrelevant for this command.
Example:
"CALC:MARK:FUNC:POW:SEL ACP"
' activate ACP measurement
"CALC:MARK:FUNC:POW:PRES FW3G"
' use WCDMA 3GPP as basis
"CALC:LIM:ACP:ACH:REL -60,-60"
' change ACP limit to -60dBc
"CALC:MARK:FUNC:POW:STAN:SAVE 'my_acp_std"
' save as ACP USER standard my_acp_std
"CALC:MARK:FUNC:POW:STAN:DEL 'my_acp_std"
' delete the user standard my_acp_std
Characteristics: *RST value: -
SCPI: device-specific
Mode: A
CALCulate<1|2>:MARKer<1...4>:FUNCtion:POWer:STANdard:SAVE <file_name>
This command saves the current ACP settings as an ACP user standard. The numeric suffixes at
MARKer are irrelevant for this command.
Example:
"CALC:MARK:FUNC:POW:SEL ACP"
' activate ACP measurement
"CALC:MARK:FUNC:POW:PRES FW3G"
' use WCDMA 3GPP as basis
"CALC:LIM:ACP:ACH:REL -60,-60"
' change ACP limit to -60dBc
"CALC:MARK:FUNC:POW:STAN:SAVE 'my_acp_std"
' save as ACP user standard my_acp_std
Characteristics: *RST value: -
SCPI: device-specific
Mode: A-F