Rohde & Schwarz R&S FSP Series, Operating Manual

Page: 448 / 796

R&S FSP Remote Control – Description of Commands
CALCulate Subsystem
6.54 Operating Manual 1164.4556.12 - 06
6.5.6.2 CALCulate:MARKer:FUNCtion Subsystem
The measurement window is selected by CALCulate 1 (screen A) or 2 (screen B).
CALCulate<1|2>:MARKer<1...4>:FUNCtion:CENTer
This command sets the center frequency of the selected measurement window equal to the frequency
of the indicated marker.
If marker 2, 3 or 4 is selected and used as delta marker, it is switched to the marker mode.
Example:
"CALC:MARK2:FUNC:CENT"
'Sets the center frequency of screen A to the frequency of marker 2.
Characteristics: *RST value: -
SCPI: device-specific
Mode: A-F
This command is an "event" and therefore has no *RST value and no query.
CALCulate<1|2>:MARKer<1...4>:FUNCtion:CSTep
This command sets the step width of the center frequency in the selected measurement window to the
X value of the current marker.
If marker 2, 3 or 4 is selected and used as delta marker, it is switched to the marker mode.
Example:
"CALC2:MARK3:FUNC:CST"
'Sets the center frequency of screen B to the same value as the frequency of
marker 3.
Characteristics: *RST value: -
SCPI: device-specific
Mode: A-F
This command is an event and therefore has no *RST value and no query.
CALCulate<1|2>:MARKer<1...4>:FUNCtion:DEModulation:CONTinuous ON | OFF
This command switches on or off the continuous demodulation in the frequency domain (span >0) in
the selected measurement window. Thus acoustic monitoring of the signals can be performed in the
frequency domain. The function does not depend on the selected marker, i.e. the numeric suffix <1...4>
is irrelevant.
The command is only available with option audio demodulator R&S FSP-B3.
Example:
"CALC2:MARK3:FUNC:DEM:CONT ON"
'Switches on the continuous demodulation in screen B.
Characteristics: *RST value: OFF
SCPI: device-specific
Mode: A