Rohde & Schwarz R&S FSP Series, Operating Manual

Page: 224 / 796

R&S FSP Instrument Functions
Basic Settings
4.152 Operating Manual 1164.4556.12 - 06
EDIT LIMIT
LINE /
NEW LIMIT
LINE
The EDIT LIMIT LINE and NEW LIMIT LINE softkeys both call the EDIT LIMIT LINE
submenu used for editing limit lines. In the table heading, the characteristics of the
limit line can be entered. The data points for frequency/time and level values are
entered in the columns.
NAME The NAME softkey enables the entry of characteristics in the table heading.
Name - Enter name
A maximum of 8 characters is permitted for each name. All names must be compat-
ible with the MS DOS conventions for file names. The instrument stores all limit lines
with the
.LIM extension.
Remote command:
CALC:LIM3:NAME "GSM1"
Domain - Select time or frequency domain
The default setting is frequency.
NAME
VALUES
INSERT VALUE
DELETE VALUE
SHIFT X LIMIT LINE
SHIFT Y LIMIT LINE
SAVE LIMIT LINE
Name Enter name.
Domain Select domain.
Unit Select units.
X-Axis Select interpolation
Limit Select upper and lower limit value.
X-Scaling Entry of absolute or relative values for the x-axis
Y-Scaling Entry of absolute or relative values for the y-axis
Margin Entry of margin.
Threshold Entry of vertical threshold (only with relative vertical
scaling)
Comment Enter comments.
Time/Frequency Enter time/frequency for the data points.
Limit/dBm Enter magnitudes for the data points.
Domain, unit, X scaling and Y scaling cannot be modified as soon as reference
values have been entered in the data section of the table.