Rohde & Schwarz R&S FSP Series, Operating Manual

Page: 486 / 796

R&S FSP Remote Control – Description of Commands
CALCulate Subsystem
6.92 Operating Manual 1164.4556.12 - 06
6.5.8 CALCulate:PEAKsearch I PSEarch Subsystem
CALCulate<1|2>:PEAKsearch|PSEarch:AUTO ON | OFF
By using this command, the peak list in the spurious measurement is calculated automatically after a
measurement. For each range, exactly one peak value is calculated.
The SENSe suffix is unused.
Example:
"CALC:PEAK:AUTO ON"
’Switches the automatic peak search on.
Characteristics: *RST value: OFF
SCPI: device-specific
Mode: A
CALCulate<1|2>:PEAKsearch|PSEarch[:IMMediate]
This command activates the generation of a peak list.
The numeric suffix in
CALCULATE<1|2>
is not significant.
Example:
"CALC:PEAK"
Characteristics: *RST value: -
SCPI: device-specific
Mode: A
This command is an event and therefore has no *RST value and no query.
CALCulate<1|2>:PEAKsearch|PSEarch:MARGin MINimum .. MAXimum
This command defines the margin for the peak search.
The numeric suffix in
CALCULATE<1|2>
is not significant.
Example:
"CALC:PEAK:MARG 5 dB"
Characteristics: *RST value: 6 dB
SCPI: device-specific
Mode: A
CALCulate<1|2>:PEAKsearch|PSEarch:SUBRanges 1 to 500
This command defines the number of subranges for the peak search.
The numeric suffix in
CALCULATE<1|2>
is not significant.
Example:
"CALC:PEAK:SUBR 10"
Characteristics: *RST value: 25
SCPI: device-specific
Mode: A