Rohde & Schwarz R&S FSP Series, Operating Manual

Page: 454 / 796

R&S FSP Remote Control – Description of Commands
CALCulate Subsystem
6.60 Operating Manual 1164.4556.12 - 06
TRACE 1 of the selected screen is always used by the function. The suffix of MARKer will be ignored.
Example:
"DISP:WIND:TRAC:Y:RLEV –10dBm"
'Sets the reference level to 10 dBm
"INP:ATT 30 dB"
'Sets the input attenuation to 30 dB
"FREQ:CENT 935.2MHz;SPAN 0Hz"
'Sets the receive frequency to 935.2 MHz and the span to 0 Hz
"BAND:RES 1MHz;VID 3MHz"
'Sets the resolution bandwidth to 1 MHz and the video bandwidth to 3 MHz
"DET RMS"
'Sets the RMS detector
"TRIG:SOUR VID;LEV:VID 50 PCT"
'Selects the trigger source VIDeo and sets the level of the video trigger source to
50 PCT
"SWE:TIME 50ms"
'Sets the sweep time to 50 ms
"INIT;*WAI"
'Starts the measurement with synchronization
"CALC:MARK:FUNC:MSUM? 50US,450US,576.9US,8"
'Queries 8 bursts with an offset of 50 µs, a test time of 450 µs and a period of
576.9 µs
Characteristics: *RST value: -
SCPI: device-specific
Mode: A-T
This command is only available from firmware version 1.30 on.
t
Trace start
Time offset of
first pulse
Measurement
Time
Measurement
Time
Measurement
Time
Period Period
P