R&S FSP
Remote Control – Description of Commands
HCOPy Subsystem
6.120
Operating Manual 1164.4556.12 - 06
HCOPy:ITEM:WINDow<1|2>:TABle:STATe
ON | OFF
This command selects the output of the currently displayed tables.
Example:
"HCOP:ITEM:WIND:TABL:STAT ON"
Characteristics:
*RST value: OFF
SCPI: device-specific
Mode:
A
The command
HCOPy:DEVice:ITEM:WINDow<1|2>:TABle:STATe OFF
as well as command
HCOPy:DEVice:ITEM:ALL
enables the output of the whole screen.
HCOPy:ITEM:WINDow<1|2>:TEXT
<string>
This command defines the comment text for measurement window 1 or 2 for printout, with a maximum
of 100 characters; line feed by means of character @).
Example:
"HCOP:ITEM:WIND2:TEXT 'comment'"
Characteristics:
*RST value: -
SCPI: device-specific
Mode:
A
HCOPy:ITEM:WINDow<1|2>:TRACe:STATe
ON | OFF
This command selects the output of the currently displayed trace.
Example:
"HCOP:ITEM:WIND:TRACe:STAT ON"
Characteristics:
*RST value: OFF
SCPI: device-specific
Mode:
A
The command
HCOPy:ITEM:WINDow<1|2>:TRACe:STATe OFF
as well as command
HCOPy:
ITEM:ALL
enables the output of the whole screen.
HCOPy:PAGE:ORIentation<1|2>
LANDscape | PORTrait
The command selects the format of the output (portrait and landscape) (hardcopy unit 1 or 2).
Example:
"HCOP:PAGE:ORI LAND"
Characteristics:
*RST value: -
SCPI: conform
Mode:
A
The command is only available provided that the output device "printer" (
HCOP:
DEST 'SYST:COMM:PRIN'
) has been selected.
Summary of Contents for R&S FSP Series
