Rohde & Schwarz R&S FSP Series, Operating Manual

Page: 531 / 796

Operating Manual 1164.4556.12 - 06 6.137
R&S FSP Remote Control – Description of Commands
MMEMory Subsystem
• the activated transducers:
A data set may include 4 transducer factors at maximum. It comprises the activated factors and, if
available, the de- activated factors last used. Therefore the combination of non-activated restored
transducer factors depends on the sequence of use with the command
MMEM:LOAD
.
• Tracking generator settings
(only in conjunction with option Tracking Generator B9 or External Generator Control B10)
• Correction data for source calibration
(only in conjunction with option Tracking Generator B9 or External Generator Control B10)
Example:
"MMEM:SEL:HWS ON"
Characteristics: *RST value: ON
SCPI: device-specific
Mode: A
MMEMory:SELect[:ITEM]:LINes:ALL ON | OFF
This command adds all limit lines (activated and de-activated) to the list of device settings to be stored/
loaded.
Example:
"MMEM:SEL:LIN:ALL ON"
Characteristics: *RST value: ON
SCPI: device-specific
Mode: A
MMEMory:SELect[:ITEM]:NONE
This command deletes all data subsets from the list of device settings to be stored/loaded.
Example:
"MMEM:SEL:NONE"
Characteristics: *RST value: --
SCPI: device-specific
Mode: A
This command is an event and therefore has no *RST value.
MMEMory:SELect[:ITEM]:SCData ON | OFF
This command adds the tracking generator calibration data to the list of device settings to be stored/
loaded.
Example:
"MMEM:SEL:SCD ON
"
'Inserts the tracking generator correction data in the list of data subsets
Characteristics: *RST value: OFF
SCPI: device-specific
Mode: A
This command is only available in conjunction with the tracking generator option B9 or external
generator control option B10.