Rohde & Schwarz R&S FSP Series, Operating Manual

Page: 617 / 796

Operating Manual 1164.4556.12 - 06 6.223
R&S FSP Remote Control – Description of Commands
SYSTem Subsystem
SYSTem:COMMunicate:PRINter:ENUMerate:FIRSt?
This command queries the name of the first printer (in the list of printers) available under Windows NT.
The names of other installed printers can be queried with command
SYSTem:COMMunicate:
PRINter:ENUMerate:NEXT?.
If no printer is configured an empty string is output.
Example:
"SYST:COMM:PRIN:ENUM:FIRS?"
Characteristics: *RST value: NONE
SCPI: device-specific
Mode: A
SYSTem:COMMunicate:PRINter:ENUMerate:NEXT?
This command queries the name of the next printer installed under Windows NT.
The command
SYSTem:COMMunicate:PRINter:ENUMerate:FIRSt?
should be sent previously
to return to the beginning of the printer list and query the name of the first printer.
The names of other printers can then be queried with NEXT?. After all available printer names have
been output, an empty string enclosed by quotation marks (") is output for the next query. Further
queries are answered by a Query Error.
Example:
"SYST:COMM:PRIN:ENUM:NEXT?"
Characteristics: *RST value: NONE
SCPI: device-specific
Mode: A
SYSTem:COMMunicate:PRINter:SELect <1|2> <printer_name>
This command selects one of the printers configured under Windows NT including the associated
output destination.
The specified printer name must be a string as returned by the commands
SYSTem:COMMunicate:PRINter:ENUMerate:FIRSt?
or
SYSTem:COMMunicate:PRINter:ENUMerate:NEXT?
Example:
"SYST:COMM:PRIN:SEL 'LASER on LPT1'"
Characteristics: *RST value: NONE
SCPI: device-specific
Mode: A
Command
HCOPy:DESTination
is used to select an output medium other than
the default one.