manualshive.com logo in svg

Rohde & Schwarz R&S FSP Series, Operating Manual

Share
Download
Rohde & Schwarz R&S FSP Series Operating Manual Download Page 154

R&S FSP

Instrument Functions

Analyzer Mode

4.82

Operating Manual 1164.4556.12 - 06

For some standards, the channel power and the adjacent-channel power are to be
weighted by means of a root-raised cosine filter corresponding to a receive filter.
This type of filtering is switched on automatically for both methods on selecting the
standard (e.g. NADC, TETRA or 3GPP W-CDMA).

As of firmware version 4.3x it is possible to configure overlapping adjacent chan-
nels. Based on a common carrier channel setting, it is now possible to measure with
two slightly different ADJ channel settings with one single measurement at the same
time.

Example:

ACP Measurement A and Measurement B are using identical TX channel settings
(Channel Bandwidth).

The ADJ settings for Measurement A and measurement B are different. 

It is now possible to do both measurements at the same time.

• Configure the ACP measurement with number of ADJ channels = 2.

• Define ADJ settings (bandwidth, spacing) as required for measurement A.

• Define ALT1 settings (bandwidth, spacing) as required for ADJ channel of 

measurement B

• Perform the ACP measurement

• Read the ACP measurement result

The Carrier Power belongs to measurement A and B

The ADJ result is the ADJ result of measurement A

The ALT1 result is the ADJ result of measurement B.

This feature is only supported for ACP but not for Multi Carrier ACP measurement.

Summary of Contents for R&S FSP Series





























































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands