Rohde & Schwarz R&S FSP Series, Operating Manual

Page: 620 / 796

R&S FSP Remote Control – Description of Commands
SYSTem Subsystem
6.226 Operating Manual 1164.4556.12 - 06
SYSTem:COMMunicate:SERial[:RECeive]:SBITs 1|2
This command defines the number of stop bits per data word for the serial interface (COM).
Example:
"SYST:COMM:SER:SBITs 2"
Characteristics: *RST value: -- (no influence on this parameter, factory default 1)
SCPI: conform
Mode: A
SYSTem:DATE 1980 to 2099, 1 to 12, 1 to 31
This command is used to enter the date for the internal calendar.
The sequence of entry is year, month, day.
Example:
"SYST:DATE 2000,6,1"
Characteristics: *RST value: –
SCPI: conform
Mode: A
SYSTem:DISPlay:FPANel ON | OFF
This command activates or deactivates the display of the front panel keys on the screen.
With the display activated, the instrument can be operated on the screen using the mouse by pressing
the corresponding buttons. This may be useful if the instrument is operated in a detached station by
means of a remote program such as PCANYWHERE.
Example:
"SYST:DISP:FPAN ON"
Characteristics: *RST value: OFF
SCPI: device-specific
Mode: A
With the display of the front panel keys activated, the screen resolution of the unit
is set to 1024x768. Thus, only a section of the whole screen is visible on the inter-
nal LCD display, which will be moved by mouse moves.
For a full display of the user interface, an external monitor has to be connected to
the rear panel.
When the front panel display is deactivated, the original screen resolution is
restored.