manualshive.com logo in svg

Rohde & Schwarz R&S FSP Series, Operating Manual

Share
Download
Rohde & Schwarz R&S FSP Series Operating Manual Download Page 143

Operating Manual 1164.4556.12 - 06

4.71

R&S FSP

Instrument Functions

Analyzer Mode

SEARCH LIMIT

OFF

The 

SEARCH LIMIT OFF 

softkey disables all limits of the search range.

Remote command:

CALC:MARK:X:SLIM OFF
CALC:THR OFF

MKR->TRACE

The function of this softkey is identical to that of the 

MKR->TRACE

 softkey in the

MKR

 menu (see 

“MKR->TRACE” on page 4.56

).

MKR->CF 
STEPSIZE

The 

MKR->CF STEPSIZE

 softkey sets the step size for the center frequency varia-

tion to the current marker frequency, and also sets step size adaptation to 

MANUAL

.

CF STEPSIZE

 remains at this value until the center frequency entry mode in the

STEP

 menu is switched from 

MANUAL

 to 

AUTO

 again.

The 

MKR

->

CF STEPSIZE

 function is, above all, useful in the measurement of har-

monics with large dynamic range (narrow bandwidth and narrow span).

The softkey is not available in the time domain (span = 0 Hz).

Remote command:

CALC:MARK:FUNC:CST

Example

The harmonics levels of a CW carrier are to be measured at 100 MHz.

MIN

The 

MIN 

softkey sets the active marker/delta marker to the minimum of the selected

trace. 

Remote command:

CALC:MARK:MIN 
CALC:DELT:MIN

NEXT MIN

The 

NEXT MIN 

softkey sets the active marker/delta marker to the next higher mini-

mum of the selected trace. 

Remote command:

CALC:MARK:MIN:NEXT 
CALC:DELT:MIN:NEXT

[

PRESET

]

R&S FSP is set to the default setting.

[

CENTER

: 100 

MHz

]

R&S FSP sets the center frequency to 100 MHz. The span
is set to 200 MHz.

[

SPAN

: 1 

MHz

]

The span is set to 100 MHz.

[

MKR->

]

MARKER 1 is switched on and set to the maximum value
of the signal.

[

NEXT

]

R&S FSP switches to the submenu.

[

MKR->CF STEPSIZE

]

The step size of the center frequency setting equals the
marker frequency (100 MHz).

[

CENTER

]

The center frequency entry mode is activated.

[

Right key

]

The center frequency is set to 200 MHz. The first harmonic
of the test signal is displayed.

[

MKR->:

 

PEAK

]

The marker is set to the harmonic and the level of the latter
is output in the marker info field.

Summary of Contents for R&S FSP Series





























































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands