manualshive.com logo in svg

Rohde & Schwarz R&S FSP Series, Operating Manual

Share
Download
Rohde & Schwarz R&S FSP Series Operating Manual Download Page 140

R&S FSP

Instrument Functions

Analyzer Mode

4.68

Operating Manual 1164.4556.12 - 06

Example

Three traces are displayed on the screen. The marker is always on Trace 1 on
switching on.

Remote command:

CALC:MARK:TRAC 2

4.5.12

Change of Settings via Markers – MKR-> Key 

The

 MKR->

 menu offers functions through which instrument parameters can be

changed with the aid of the currently active marker. The functions can be used on
markers and delta markers.

On opening the menu, the entry for the last active marker is activated; if no marker
was enabled, MARKER 1 is activated and a peak search is performed.

MKR->

[

MKR ->TRACE

] "1"

The marker jumps to Trace 2, but remains at
the previous frequency or time.

[

MKR ->TRACE

] "3"

The marker jumps to Trace 3.

SELECT MARKER

PEAK

CENTER = MKR FREQ

REF LEVEL = MKR LVL

NEXT PEAK

NEXT PEAK RIGHT

NEXT PEAK LEFT

SEARCH LIMITS

 

!

LEFT LIMIT / 
RIGHT LIMIT

THRESHOLD

SEARCH LIMIT OFF

MKR->TRACE

Side menu

MKR->CF STEPSIZE

MIN

NEXT MIN

NEXT MIN RIGHT

NEXT MIN LEFT

EXCLUDE LO

PEAK EXCURSION

2. side menu

AUTO MAX PEAK 
AUTO MIN PEAK

Summary of Contents for R&S FSP Series





























































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands