Rohde & Schwarz R&S FSP Series, Operating Manual

Page: 571 / 796

Operating Manual 1164.4556.12 - 06 6.177
R&S FSP Remote Control – Description of Commands
SENSe Subsystem
[SENSe<1|2>:]LIST:RANGe<1...20>[:FREQuency]:STOP <numeric_value>
This command sets the stop frequency of a range in the spurious measurement.
Example:
"LIST:RANG2:STOP 2GHZ"
'Stop frequency of range 2 to 2 GHz
Characteristics: *RST value: --
SCPI: device-specific
Mode: A
[SENSe<1|2>:]LIST:RANGe<1...20>:INPut:ATTenuation <numeric_value>
This command defines the RF attenuation of a range in the spurious measurement.
Example:
"LIST:RANG2:INP:ATT 30db"
'RF attenuation of range 2 to 30 dB
Characteristics: *RST value: -
SCPI: device-specific
Mode: A
[SENSe<1|2>:]LIST:RANGe<1...20>:INPut:ATTenuation:AUTO ON | OFF
This command switches the autoranging of a range in the spurious measurement on or off.
Example:
"LIST:RANG2:INP:ATT:AUTO ON"
'Activates autorange for range 2
Characteristics: *RST value: ON
SCPI: device-specific
Mode: A
[SENSe<1|2>:]LIST:RANGe<1...20>:INPut:GAIN:STATe ON | OFF
This command switches the preamplifier of a range in the spurious measurement on or off.
Example:
"LIST:RANG2:INP:GAIN:STAT ON"
'Activates the preamplifier for range 2
Characteristics: *RST value: OFF
SCPI: device-specific
Mode: A
[SENSe<1|2>:]LIST:RANGe<1...20>:LIMit -200dB to +200dB
This command defines the limit lines for the spurious emission measurement LIST EVALUATION (for
details on this measurement see page 220). For each of the 20 ranges, you can specify a limit line via
the numeric suffix at RANGe<1...20>. The numeric suffix at SENSe<1|2> is irrelevant.
Example:
"LIST:RANG5:LIM -40"
’Limit line in range 5 is –40 dB.
Characteristics: *RST value: -13dB
SCPI: device-specific
Mode: A