Rohde & Schwarz R&S FSP Series, Operating Manual

Page: 622 / 796

R&S FSP Remote Control – Description of Commands
SYSTem Subsystem
6.228 Operating Manual 1164.4556.12 - 06
SYSTem:FIRMware:UPDate <path>
As of firmware version 4.5x it is possible to update base system and applications in one single step.
The structure of the update folder has to look like:
Extract the ZIP file containg the files needed for an update including the folder structure. Create the
required sub folders on the instrument and copy all the files from all sub folders onto the instrument.
Now start the remote update.
Note that in some environments instead of the ’\' character, a special escape character may be
required, e.g. '\\' for C/C++ programming language.
Example:
"SYST:FIRM:UPD 'D:\USER\FWUPDATE'"
'Starts the firmware update from directory D:\USER\FWUPDATE using the files of
the subfolders DISK1 to DISK<n>, including the contents of the EXTENSION
subfolder.
Characteristics: *RST value: –
SCPI: device-specific
Mode: A
This command is an 'event' and therefore has no query and no *RST value.
SYSTem:HPCoupling FSP | HP
This command controls the default coupling ratios Span/RBW and RBW/VBW for HP emulation mode.
In case of FSP the standard parameter coupling of the instrument is used. As a result in most cases a
shorter sweeptime is used than in case of HP. This command can only be selected in the HP emulation
mode.
Parameter: FSP: Use the instrument's default coupling ratios for span and resolution
bandwidth (Span/RBW) and for resolution bandwidth and video bandwidth
(RBW/VBW)
HP: Origin HP coupling ratios
Example:
"SYST:LANG '8566B'"
’Switches the HP emulation on
"SYST:HPC HP"'
’Uses HP coupling ratios