Rohde & Schwarz R&S FSP Series, Operating Manual

Page: 606 / 796

R&S FSP Remote Control – Description of Commands
SOURce Subsystem
6.212 Operating Manual 1164.4556.12 - 06
Mode: A
SOURce<1|2>:EXTernal<1|2>:ROSCillator[:SOURce] INTernal | EXTernal
This command switches between external and internal reference oscillator for the frequency
processing of external generator 1 and 2.
The command always works on both generators. Therefore, the numeric suffix in EXTernal<1|2> is not
significant.
This command is only valid in combination with option Ext. Generator Control R&S FSP-B10.
Example:
"SOUR:EXT:ROSC EXT"
'switches to external reference oscillator
Characteristics: *RST value: INT
SCPI: device-specific
Mode: A
This command is available from firmware version 1.40 or higher.
SOURce<1|2>:EXTernal<1|2>[:STATe] ON | OFF
This command activates or deactivates the external generator selected with
SOUR:EXT<1|2>:FREQ:
SWE ON
in the selected window.
The suffix behind EXTernal is irrelevant for this command.
This command is only available in connection with option Ext. Generator Control B10.
Example:
"SYST:COMM:RDEV:GEN1:TYPE 'SMP02'"
'Selects SMP02 as generator 1.
"SYST:COMM:RDEV:GEN1:LINK TTL"
'Selects GPIB + TTL link as interface.
"SYST:COMM:RDEV:GEN1:ADDR 28"
'Sets the generator address to 28.
"
SOUR:EXT1:FREQ:SWE ON"
'Activates the frequency sweep for generator 1.
"SOUR:EXT ON"
'Activates the external generator
Characteristics: *RST value: OFF
SCPI: device-specific
Mode: A