Rohde & Schwarz R&S FSP Series, Operating Manual

Page: 527 / 796

Operating Manual 1164.4556.12 - 06 6.133
R&S FSP Remote Control – Description of Commands
MMEMory Subsystem
MMEMory:DELete:IMMediate <file_name>
This command deletes the indicated files. Any ’read only’ labels are ignored.
The indication of the file name contains the path and, optionally, the drive name. Indication of the path
complies with DOS conventions.
Parameter: <file_name> ::= DOS file name
Example:
"MMEM:DEL:IMM 'TEST01.HCP'"
'The file TEST01.HCP is deleted.
Characteristics: *RST value: -
SCPI: device-specific
Mode: A
This command is an event and therefore has no *RST value and no query.
MMEMory:INITialize <msus>
This command formats the disk in drive A. Formatting deletes all data stored on the disk.
Parameter: <msus> ::= 'A:'
Only drive name A: is accepted.
Example:
"MMEM:INIT 'A:'"
Characteristics: *RST value: -
SCPI: conform
Mode: A
This command is an event and therefore has no *RST value and no query.
MMEMory:LOAD:AUTO 1,<file_name>
This command defines which device setting is automatically loaded after the device is switched on.
The contents of the file are read after switching on the device and used to define the new device state.
The file name includes indication of the path and may also include the drive. The path name complies
with DOS conventions.
Parameter: <file_name> ::= DOS file name without extension;
FACTORY denotes the data set previously in the instrument
Example:
"MMEM:LOAD:AUTO 1,'D:\USER\DATA\TEST'"
Characteristics: *RST value: FACTORY
SCPI: device-specific
Mode: A
This command is an event and therefore has no *RST value and no query.
The data set defined as auto recall set will also be restored by a *RST-command.