Rohde & Schwarz R&S FSP Series, Operating Manual

Page: 443 / 796

Operating Manual 1164.4556.12 - 06 6.49
R&S FSP Remote Control – Description of Commands
CALCulate Subsystem
CALCulate<1|2>:MARKer<1...4>:MINimum:LEFT
This command positions the specified marker to the next higher minimum value to the left of the current
value (i.e. in descending X direction) on the corresponding trace.
Example:
"CALC:MARK2:MIN:LEFT"
'Positions marker 2 in screen A to the next higher minimum value to the left of the
current value.
Characteristics: *RST value: -
SCPI: device-specific
Mode: A
This command is an event and therefore has no *RST value and no query.
CALCulate<1|2>:MARKer<1...4>:MINimum:NEXT
This command positions the specified marker to the next higher minimum value of the corresponding
trace.
Example:
"CALC:MARK2:MIN:NEXT"
'Positions marker 2 in screen A to the next higher maximum value.
Characteristics: *RST value: -
SCPI: device-specific
Mode: A
This command is an event and therefore has no *RST value and no query.
CALCulate<1|2>:MARKer<1...4>:MINimum[:PEAK]
This command positions the specified marker to the current minimum value of the corresponding trace.
The corresponding marker is activated first or switched to marker mode, if necessary.
Example:
"CALC:MARK2:MIN"
'Positions marker 2 in screen A to the minimum value of the trace.
Characteristics: *RST value: -
SCPI: device-specific
Mode: A
This command is an event and therefore has no *RST value and no query.
If no next higher minimum value is found on the trace (level spacing to adjacent
values < peak excursion), an execution error (error code: -200) is produced.
If no next higher minimum value is found on the trace (level spacing to adjacent
values < peak excursion), an execution error (error code: -200) is produced.
If no minimum value is found on the trace (level spacing to adjacent values < peak
excursion), an execution error (error code: -200) is produced.