Rohde & Schwarz R&S FSP Series, Operating Manual

Page: 340 / 796

R&S FSP Instrument Functions
LO/IF ports for external mixers - Option R&S FSP-B21
4.268 Operating Manual 1164.4556.12 - 06
The table contains the following parameters for each band:
BAND - Designation of waveguide band
Remote command:
MIX:HARM:BAND E
RANGE - Frequency range
The frequency range of the waveguide band or the frequency range which is cov-
ered by the selected harmonic is shown in this field.
Remote command:
--
HARMONIC# - Order of harmonic
Order of harmonic used for conversion The order is selected automatically depend-
ing on the definition made in the
EVEN / ODD HARMONICS column. The lowest
order is selected that allows conversion of input signals in the whole band.
If due to LO frequency the conversion is not possible using one harmonic, the band
is splitted. Frequency range and order of harmonic of the resulting parts are shown
within the field.
Within the band USER the order of harmonic is defined by the user. The resulting
frequency range will be automatically entered into the field RANGE . The order of
harmonic can be between 3and 76, the lowest usable frequency being 40 GHz.
Remote command:
MIX:HARM 5
EVEN/ODD HARMONICS - Designation of harmonic to be used
Defines if only even, only odd, or even and odd harmonics can be used for conver-
sion.
Depending on what has been selected within this field the order of harmonic to be
used for conversion will change (shown in the field
HARMONIC# ).
EVEN/ODD
EVEN
ODD