Rohde & Schwarz R&S FSP Series, Operating Manual

Page: 372 / 796

R&S FSP Remote Control – Basics
Structure and Syntax of the Device Messages
5.10 Operating Manual 1164.4556.12 - 06
Common commands
Common commands consist of a header preceded by an asterisk "*" and one or
several parameters, if any.
Examples:
*RST
RESET, resets the device
*ESE 253
EVENT STATUS ENABLE, sets the bits of the event status enable register
*ESR?
EVENT STATUS QUERY, queries the contents of the event status register.
Device-specific commands
Hierarchy:
Device-specific commands are of hierarchical structure (see Fig. 5.1 ). The different
levels are represented by combined headers. Headers of the highest level (root
level) have only one key word. This key word denotes a complete command system.
Example:
SENSe
This key word denotes the command system
SENSe
.
For commands of lower levels, the complete path has to be specified, starting on the
left with the highest level, the individual key words being separated by a colon ":".
Example:
SENSe:FREQuency:SPAN 10MHZ
This command lies in the third level of the SENSe system. It sets the frequency
span.
Fig. 5.1 Tree structure the SCPI command systems using the SENSe system by way of example
The commands used in the following examples are not in every case implemented
in the instrument.
SENSe
BANDwidth FUNCtion FREQuency
STOP CENTer SPAN OFFSet
STARt
DETector