manualshive.com logo in svg

Rohde & Schwarz R&S FSP Series, Operating Manual

Share
Download
Rohde & Schwarz R&S FSP Series Operating Manual Download Page 125

Operating Manual 1164.4556.12 - 06

4.53

R&S FSP

Instrument Functions

Analyzer Mode

Example 

Remote command:

CALC:MARK ON
CALC:MARK:X <value>
CALC:MARK:Y? 

CALC:DELT ON
CALC:DELT:MODE ABS|REL
CALC:DELT:X <value>
CALC:DELT:X:REL?
CALC:DELT:Y?

When several traces are being displayed, the marker is set to the maximum value
(peak) of the active trace which has the lowest number (1 to 3). In case a marker is
already located there, it will be set to the frequency of the next lowest level (next
peak).

When the split-screen display mode is active, the marker will be placed in the active
window. A marker can only be enabled when at least one trace in the corresponding
window is visible.

If a trace is turned off, the corresponding markers and marker functions are also
deactivated. If the trace is switched on again (

VIEW

, 

CLR/WRITE

;..), the markers

along with coupled functions will be restored to their original positions provided the
markers have not been used on another trace. 

4.5.10.1

Frequency Measurement with the Frequency Counter

In order to accurately determine the frequency of a signal, R&S FSP is equipped
with a frequency counter which measures the frequency of the RF signal at the inter-
mediate frequency. Using the measured IF, R&S FSP calculates the frequency of
the RF input signal by applying the known frequency conversion factors.

The frequency measurement error depends only upon the accuracy of the frequency
standard used (external or internal reference). Although R&S FSP always operates
synchronously irrespective of the set span, the frequency counter delivers a more
exact result than a measurement performed with a marker. This is due to the follow-
ing:

[

PRESET

]

 R&S FSP is set to the default setting.

[

MKR

]

On calling the menu, 

MARKER 1

 is switched on ('1' highlighted in

the softkey) and positioned on the maximum value of the trace. It is
a normal marker and the 

MARKER NORMAL

 softkey is high-

lighted.

[

MARKER 2

]

MARKER 2

 is switched on ('2' highlighted in the softkey). It is auto-

matically defined as a delta marker on switching on so the 

DELTA

is highlighted on softkey 

MARKER NORM DELTA

. The frequency

and level of 

MARKER 2

 with reference to 

MARKER 1

 are output in

the marker info field.

[

MARKER

NORM DELTA

]

The 

MARKER NORM DELTA

 softkey is highlighted. 

MARKER 2

becomes a normal marker. The frequency and level of 

MARKER 2

are output as absolute values in the marker info field.

[

MARKER 2

]

MARKER 2

 is switched off. 

MARKER 1

 is the active marker for

entry. The frequency and level of 

MARKER 1

 are output in the

marker info field.

Summary of Contents for R&S FSP Series





























































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands