Rohde & Schwarz R&S FSP Series, Operating Manual

Page: 709 / 796

Operating Manual 1164.4556.12 - 06 6.315
R&S FSP Remote Control – Description of Commands
Differences in GPIB Behavior between the FSP and the FSE Families of Instruments
R&S
FSP FSE [SENSe<1|2>:]FREQuency:CENTer 0 to f
max
frequency ranges are
different for R&S FSP
and FSE
FSE [SENSe<1|2>:]FREQuency:CENTer:LINK STARt | STOP | SPAN not available for
R&S FSP
R&S
FSP FSE [SENSe<1|2>:]FREQuency:CENTer:STEP 0 to f
max
frequency ranges are
different for R&S FSP
and FSE
R&S
FSP FSE [SENSe<1|2>:]FREQuency:CENTer:STEP:LINK SPAN | RBW | OFF
R&S
FSP FSE [SENSe<1|2>:]FREQuency:CENTer:STEP:LINK:
FACTor 1 to 100 PCT
R&S
FSP FSE [SENSe<1|2>:]FREQuency:MODE CW|FIXed | SWEep
R&S
FSP FSE [SENSe<1|2>:]FREQuency:OFFSet <numeric_value>
FSET [SENSe<1|2>:]FREQuency:RANGe 2 GHz | 22 GHz not available for
R&S FSP
R&S
FSP FSE [SENSe<1|2>:]FREQuency:SPAN 0 to f
max
frequency ranges are
different for R&S FSP
and FSE
R&S
FSP FSE [SENSe<1|2>:]FREQuency:SPAN:FULL
FSE [SENSe<1|2>:]FREQuency:SPAN:LINK CENTer | STOP | SPAN not available for
R&S FSP
R&S
FSP FSE [SENSe<1|2>:]FREQuency:STARt 0 to f
max
frequency ranges are
different for R&S FSP
and FSE
FSET [SENSe<1|2>:]FREQuency:STARt:FLINe[:STATe] ON | OFF not available for
R&S FSP. Replaced by
CALC:MARK:FUNC:
SLIMits
FSE [SENSe<1|2>:]FREQuency:STARt:LINK CENTer | STOP | SPAN not available for
R&S FSP
R&S
FSP FSE [SENSe<1|2>:]FREQuency:STOP 0 to f
max
frequency ranges are
different for R&S FSP
and FSE
FSET [SENSe<1|2>:]FREQuency:STOP:FLINe[:STATe] ON | OFF not available for
R&S FSP; replaced by
CALC:MARK:FUNC:
SLIMits.
FSE [SENSe<1|2>:]FREQuency:STOP:LINK CENTer | STARt | SPAN not available for
R&S FSP
FSET/
ESIB [SENSe<1|2>:]FREQuency[:CW|:FIXed] f
min
to f
max
not available for
R&S FSP
FSET/
ESIB [SENSe<1|2>:]FREQuency[:CW|:FIXed]:STEP f
min
to f
max
not available for
R&S FSP
R&S
FSP [SENSe<1|2>:]LIST:POWer:RESult? new function for
R&S FSP
Devices Command (Sheet 36 of 47) Parameter Notes