Rohde & Schwarz R&S FSP Series, Operating Manual

Page: 546 / 796

R&S FSP Remote Control – Description of Commands
SENSe Subsystem
6.152 Operating Manual 1164.4556.12 - 06
This command is only available with the option R&S FSP-B21 (modell R&S FSP 40 only).
[SENSe<1|2>:]CORRection:CVL:SELect <file_name>
This command selects the Conversion Loss Table designated with <file_name>. If <file_name> is not
available, a new Conversion Loss Table will be created.
Parameter: <file_name>::= Name of Conversion Loss Table as string data with a maximum of
8 characters
Example:
"CORR:CVL:SEL 'LOSS_TAB_4'"
Characteristics: *RST value: -
SCPI: device-specific
Mode: A
This command is only available with the option R&S FSP-B21 (modell R&S FSP 40 only).
[SENSe<1|2>:]CORRection:CVL:SNUMber <string>
This command defines the serial number of the mixer in the Conversion Loss Table. Prior to this
command, the command
SENS:CORR:CVL:SEL
must be sent.
Parameter: <string>::= Serial number of mixer with a maximum of 16 characters
Example:
"CORR:CVL:SEL 'LOSS_TAB'"
"CORR:CVL:SNUM '123.4567'"
Characteristics: *RST value: -
SCPI: device-specific
Mode: A
This command is only available with the option R&S FSP-B21 (modell R&S FSP 40 only).
[SENSe<1|2>:]CORRection:METHod TRANsmission | REFLection
This command selects the type of measurement with active tracking generator (transmission/
reflection).
Example:
"CORR:METH TRAN "
'Sets the type of measurement in screen A to “transmission“.
Characteristics: *RST value: TRANsmission
SCPI: device-specific
Mode: A
This command is only valid in conjunction with the tracking generator / ext. generator control option
(B9/B10).
This command must be sent prior to the subsequent commands used to change/
activate the Conversion Loss files.