Rohde & Schwarz R&S FSP Series, Operating Manual

Page: 713 / 796

Operating Manual 1164.4556.12 - 06 6.319
R&S FSP Remote Control – Description of Commands
Differences in GPIB Behavior between the FSP and the FSE Families of Instruments
ESIB [SENSe<1|2>:]SCAN<1...10>:INPut:GAIN[:
STATE] ON | OFF not available for
R&S FSP
ESIB [SENSe<1|2>:]SCAN<1...10>:INPut:TYPE INPUT1 | INPUT2 not available for
R&S FSP
FSET [SENSe<1|2>:]SCAN<1...10>:INPut:TYPE RF | BALanced not available for
R&S FSP
FSET/
ESIB [SENSe<1|2>:]SCAN<1...10>:STARt f
min
to f
max
not available for
R&S FSP
FSET/
ESIB [SENSe<1|2>:]SCAN<1...10>:STEP f
min
to f
max
not available for
R&S FSP
FSET/
ESIB [SENSe<1|2>:]SCAN<1...10>:STOP f
min
to f
max
not available for
R&S FSP
FSET/
ESIB [SENSe<1|2>:]SCAN<1...10>:TIME 100 µs to 100 s not available for
R&S FSP
R&S
FSP FSE [SENSe<1|2>:]SWEep:COUNt 0 to 32767
R&S
FSP FSE [SENSe<1|2>:]SWEep:EGATe ON | OFF
R&S
FSP FSE [SENSe<1|2>:]SWEep:EGATe:HOLDoff 0 to 100s
R&S
FSP FSE [SENSe<1|2>:]SWEep:EGATe:LENGth 0 to 100s
FSE [SENSe<1|2>:]SWEep:EGATe:LENGth 0 to 100s
FSE [SENSe<1|2>:]SWEep:EGATe:LEVel -5V to +5V not availabe for
R&S FSP
R&S
FSP FSE [SENSe<1|2>:]SWEep:EGATe:POLarity POSitive | NEGative
R&S
FSP FSE [SENSe<1|2>:]SWEep:EGATe:SOURce EXTernal | IFPower |
RFPower
R&S
FSP FSE [SENSe<1|2>:]SWEep:EGATe:TYPE LEVel | EDGE
FSE [SENSe<1|2>:]SWEep:GAP ON | OFF not available for
R&S FSP
FSE [SENSe<1|2>:]SWEep:GAP:LENGth 0 to 100s not available for
R&S FSP
FSE [SENSe<1|2>:]SWEep:GAP:PRETrigger 0 to 100s not available for
R&S FSP
FSE [SENSe<1|2>:]SWEep:GAP:TRGTogap 0 to 100s not available for
R&S FSP
R&S
FSP [SENSe<1|2>:]SWEep:POINts <numeric_value> not available for FSE
FSET/
ESIB [SENSe<1|2>:]SWEep:SPACing LINear | LOGarithmic |
AUTO not available for
R&S FSP
FSE/
FSIQ [SENSe<1|2>:]SWEep:SPACing LINear | LOGarithmic not available for
R&S FSP
Devices Command (Sheet 40 of 47) Parameter Notes