manualshive.com logo in svg

Rohde & Schwarz R&S FSP Series, Operating Manual

Share
Download
Rohde & Schwarz R&S FSP Series Operating Manual Download Page 141

Operating Manual 1164.4556.12 - 06

4.69

R&S FSP

Instrument Functions

Analyzer Mode

SELECT 
MARKER

The 

SELECT MARKER

 softkey activates the numerical selection of the marker in

the data entry field. Delta marker 1 is selected by input of ' 0 '. 

Remote command:

CALC:MARK1 ON
CALC:MARK1:X <value>
CALC:MARK1:Y? 

PEAK

The 

PEAK 

softkey sets the active marker/delta marker to the peak of the trace. If no

marker is active when 

MKR->

 menu is called, MARKER 1 is automatically switched

on and the peak search is performed. 

Remote command:

CALC:MARK:MAX
CALC:DELT:MAX

CENTER = 
MKR FREQ

The 

CENTER = MKR FREQ

 softkey sets the center frequency to the current marker

or delta marker frequency.
A signal can thus be set to the center of the frequency display range, for example,
so that it can then be examined in detail with a smaller span.

The softkey is not available in the time domain (zero span).

Remote command:

CALC:MARK:FUNC:CENT

Example

A spectrum is displayed with a large span after PRESET. A signal off the center is to
be examined in detail:

REF LEVEL = 
MKR LVL

The 

REF LEVEL = MKR LVL 

softkey sets the reference level to the current marker

level.

Remote command:

CALC:MARK:FUNC:REF

Example

A spectrum is displayed with a large span after PRESET. A signal off the center is to
be examined in detail:

[

PRESET

]

 R&S FSP is set to the default setting.

[

MKR->

]

MARKER 1 is switched on and automatically jumps to
the largest signal of the trace.

[

CENTER=MKR FREQ

]

The center frequency is set to the marker frequency. The
span is adapted in such a way that the minimum fre-
quency (= 0 Hz) or the maximum frequency is not
exceeded.

[

SPAN

]

The span can, for example, be reduced using the rotary
knob.

[

PRESET

]

R&S FSP is set to the default setting.

[

MKR->

]

MARKER 1 is switched on and automatically jumps to
the largest signal of the trace.

[

CENTER=MKR FREQ

]

The center frequency is set to the marker frequency.
The span is adapted in such a way that the minimum fre-
quency (= 0 Hz) or the maximum frequency is not
exceeded.

Summary of Contents for R&S FSP Series





























































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands