Rohde & Schwarz R&S FSP Series, Operating Manual

Page: 262 / 796

R&S FSP Instrument Functions
Basic Settings
4.190 Operating Manual 1164.4556.12 - 06
COMMAND
TRACKING
The COMMAND TRACKING softkey activates or deactivates the SCPI error log
function. All remote control commands received by the R&S FSP are recorded in the
following
log file:
D:\R_S\instr\log\IEC_CMDS.LOG
Logging the commands may be extremely useful for debug purposes, e.g. in order
to find misspelled keywords in control programs.
Remote command:
--
EXPORT /
IMPORT DEV
DATA
The EXPORT DEV DATA softkey opens a dialog to export device specific data onto
USB stick or floppy disk.
The export function automatically creates a sub folder using the instrument name
and the serial number, e.g. FSQ40_123000 and copies device specific files to this
folder:
• Option license key codes
• Board specific data
IMPORT DEV DATA reads these data back onto the instrument.
Select the folder, where the instrument specific sub folder is located and press
OPEN . A dialog asks to perform a reboot when the import is done.
This function is helpful to backup device specific data, e.g. the option license keys. It
is also helpful if you have to use a removable flash disk for more than one device. In
this case:
• Export the instrument data of device 1.
• Switch instrument 1 off.
• Remove the flash disk from device 1.
• Insert the flash disk into device 2.
• Switch instrument 2 on
• Import the instrument data of device 2 (saved before).
Note that a new export of the specific instrument data is required whenever:
• A new option key was inserted.
• The Rohde & Schwarz Service refitted a board.
• The Rohde & Schwarz Service performed a device calibration.
Remote command:
---
If this softkey is activated, the R&S FSP becomes slower.