Rohde & Schwarz R&S FSP Series, Operating Manual

Page: 714 / 796

R&S FSP Remote Control – Description of Commands
Differences in GPIB Behavior between the FSP and the FSE Families of Instruments
6.320 Operating Manual 1164.4556.12 - 06
R&S
FSP FSE [SENSe<1|2>:]SWEep:TIME 2.5ms to 1000s | 1µs to
16000s different parameter
ranges for R&S FSP and
FSE
R&S
FSP FSE [SENSe<1|2>:]SWEep:TIME:AUTO ON | OFF
FSE [SENSe<1|2>:]TCAPture:LENGth 1024 | 2048 | 4096 |
8192 | 16384 not available for
R&S FSP
FSE [SENSe<1|2>:]TV:PSOFfset 0 to 6.5 MHz not available for
R&S FSP and FSET
R&S
FSP [SENSe<1|2>:]TV:CCVS INTernal | EXTernal new function for
R&S FSP
R&S
FSP FSE [SENSe<1|2>:]TV[:STATe] ON | OFF
R&S
FSP FSE SOURce:AM:STATe ON | OFF
R&S
FSP FSE SOURce:DM:STATe ON | OFF
R&S
FSP SOURce:EXTernal[:STATe ] ON | OFF new command for
R&S FSP
R&S
FSP SOURce:EXTernal:FREQuency:OFFset <numeric_value> new command for
R&S FSP
R&S
FSP SOURce:EXTernal:FREQuency[:FACTor]:
NUMerator <numeric_value> new command for
R&S FSP
R&S
FSP SOURce:EXTernal:FREQuency[:FACTor]:
DENominator <numeric_value> new command for
R&S FSP
R&S
FSP SOURce:EXTernal:FREQuency:SWEep[:STATe] ON | OFF new command for
R&S FSP
R&S
FSP SOURce:EXTernal:POWer[:LEVel] <numeric_value> new command for
R&S FSP
R&S
FSP FSE SOURce:FM:STATe ON | OFF
R&S
FSP FSE SOURce:FREQuency:OFFSet -150Hz to 150MHz different value ranges for
R&S FSP and FSE
FSE SOURce:POWer:ALC:SOURce INTernal | EXTernal not available for
R&S FSP and FSET
R&S
FSP FSE SOURce:POWer[:LEVel][:IMMediate]:OFFSet -200dB to +200dB
R&S
FSP FSE SOURce:POWer[:LEVel][:IMMediate][:AMPLitude] -30dBm to 0dBm different value ranges for
R&S FSP and FSE
R&S
FSP FSE STATus:OPERation:CONDition?
FSE STATus:OPERation:CONDition?
R&S
FSP FSE STATus:OPERation:ENABle 0 to 65535
R&S
FSP FSE STATus:OPERation:NTRansition 0 to 65535
Devices Command (Sheet 41 of 47) Parameter Notes