Rohde & Schwarz R&S FSP Series, Operating Manual

Page: 266 / 796

R&S FSP Instrument Functions
Basic Settings
4.194 Operating Manual 1164.4556.12 - 06
For details on storing and loading instrument settings refer to the Quick Start Guide,
chapter
“ Storing and Loading Instrument Settings” .
SAVE |
RECALL
The SAVE softkey opens the Save dialog box for entering the data set to be stored.
The RECALL softkey activates the Recall dialog box to enter the data set to be
loaded. The RECALL table shows the current settings regarding the data set.
The entries are edited with the rotary knob or the CURSOR UP / DOWN key and is
confirmed by pressing the rotary knob or the ENTER key.
Subdirectories are opened by the CURSOR RIGHT
U r
key and closed with the
CURSOR LEFT
U l
key.
In the Save dialog box, the field already contains a suggestion for a new name: the
file name used in the last saving process is counted up to the next unused name.
For example, if the name last used was "test_004", the new name "test_005" is sug-
gested, but only if this name is not in use. If the name "test_005" is already in use,
the next free name is suggested, e.g. "test_006". You can change the suggested
name to any name conform to the following naming conventions.
The name of a settings file consists of a base name followed by an underscore and
three numbers, e.g. "limit_lines_005". In the example, the base name is "limit_lines".
The base name can contain characters, numbers and underscores. The file exten-
sion is added automatically and can not be changed.
EDIT COMMENT
SELECT ITEMS
!
SELECT ITEMS
ENABLE ALL ITEMS
DISABLE ALL ITEMS
DELETE FILE
NEW FOLDER
STARTUP RECALL
FILE MANAGER
!
EDIT PATH
NEW FOLDER
PASTE
SORT MODE
!
NAME
DATE
EXTENSION
SIZE
2 FILE LISTS
Side menu
FORMAT DISK