Rohde & Schwarz R&S FSP Series, Operating Manual

Page: 240 / 796

R&S FSP Instrument Functions
Basic Settings
4.168 Operating Manual 1164.4556.12 - 06
A table with the available factors is displayed, and the active transducer can be
selected from this list.
The TRANSDUCER FACTOR table contains all the defined factors with name and
unit. If the number of transducer factors defined exceeds the number of lines avail-
able in the table, the user has to scroll through the table.
Only one factor at a time can be activated. A check sign next to the name indicates
that the transducer is active.
TRANSDUCER
FACTOR
The TRANSDUCER FACTOR softkey places the scrollbar on the position of the
active transducer factor.
If a transducer factor is not active, the scrollbar is placed on the first line of the table.
Remote command:
CORR:TRAN:SEL <name>
CORR:TRAN ON | OFF
EDIT TRD
FACTOR
The EDIT TRD FACTOR softkey gives access to the submenu for editing and gener-
ating transducer factors. For details refer to section “Entry and Editing of Transducer
Factors” on page 4.169 .
NEW FACTOR The NEW FACTOR softkey gives access to the submenu for editing and generating
transducer factors. For details refer to section “Entry and Editing of Transducer Fac-
tors” on page 4.169 .
DELETE
FACTOR
The DELETE FACTOR softkey deletes the marked factor.
To prevent deletion by mistake, deletion has to be confirmed.
NEW FACTOR /
EDIT TRD FACTOR
!
TRD FACTOR NAME
TRD FACTOR UNIT
TRD FACTOR VALUES
INSERT LINE
DELETE LINE
SAVE TRD FACTOR
DELETE FACTOR
VIEW TRANSDUCER
REFLVL ADJ AUTO MAN
PAGE UP
PAGE DOWN