Rohde & Schwarz R&S FSP Series, Operating Manual

Page: 394 / 796

R&S FSP Remote Control – Basics
Status Reporting System
5.32 Operating Manual 1164.4556.12 - 06
5.7.5 Resetting Values of the Status Reporting System
The table below comprises the different commands and events causing the status
reporting system to be reset. None of the commands, except for *RST and SYSTem:
PRESet influences the functional instrument settings. In particular, DCL does not
change the instrument settings.
1) Every command being the first in a command line, i.e., immediately following a <PROGRAM MESSAGE TERMINATOR> clears the output
buffer.
Event Switching on
supply voltage DCL,SDC
(Device Clear,
Selected
Device Clear)
*RST or
SYSTem:
PRESet STATus:
PRESet *CLS
Power-On-Status-
Clear
Effect 0 1
Clear STB,ESR — yes — — — yes
Clear SRE,ESE — yes — — —
Clear PPE — yes — — —
Clear EVENTt parts of the
registers — yes — — yes
Clear Enable parts of all
OPERation and QUEStionable
registers, Fill Enable parts of all
other registers with "1". — yes — — yes —
Fill PTRansition parts with "1" ,
Clear NTRansition parts — yes — — yes —
Clear error queue yes yes — — — yes
Clear output buffer yes yes yes 1) 1) 1)
Clear command processing and
input buffer yes yes yes — — —