manualshive.com logo in svg

Rohde & Schwarz R&S FSP Series, Operating Manual

Share
Download
Rohde & Schwarz R&S FSP Series Operating Manual Download Page 427

Operating Manual 1164.4556.12 - 06

6.33

R&S FSP

Remote Control – Description of Commands

CALCulate Subsystem

Example:

"CALC:LIM:ACP:ACH 30DB, 30DB"

'Sets the relative limit value in screen A for the power in the lower and upper 
adjacent channel to 30 dB below the channel power.

"CALC:LIM:ACP:ACH:ABS -35DBM, -35DBM" 

'Sets the absolute limit value in screen A for the power in the lower and upper
adjacent channel to -35 dB. 

"CALC:LIM:ACP ON"

 

'Switches on globally the limit check for the channel/adjacent channel
measurement in screen A.

"CALC:LIM:ACP:ACH:STAT ON"

 

'Switches on the limit check for the adjacent channels in screen A.

"INIT;*WAI" 

'Starts a new measurement and waits for the sweep end.

"CALC:LIM:ACP:ACH:RES?"

 

'Queries the limit check result in the adjacent channels in screen A.

Characteristics:

*RST value: --
SCPI: device-specific

Mode:

A

This command is a query and therefore has no *RST value.

CALCulate<1|2>:LIMit<1...8>:ACPower:ALTernate<1...11>:ABSolute

-200DBM to 200DBM, 

-200DBM to 200DBM 

This command defines the absolute limit value for the lower/upper alternate adjacent channel power
measurement (Adjacent Channel Power) in the selected measurement window. 

The numeric suffix after ALTernate<1...11> denotes the alternate channel. The numeric suffixes
<1...8> are irrelevant for this command.

It should be noted that the absolute limit value for the limit check has no effect as soon as it is below
the relative limit value defined with 

CALCulate:LIMit:ACPower:ALTernate<1...11>:

RELative

. This mechanism allows automatic checking of the absolute basic values defined in mobile

radio standards for the power in adjacent channels.

Parameter:

The first value is the limit for the lower and the upper alternate adjacent channel. 
The second limit value is ignored but must be indicated for reasons of compatibility 
with the FSE family.

Example:

"CALC:LIM:ACP:ALT2:ABS -35DBM, -35DBM" 

'Sets the absolute limit value in screen A for the power in the lower and upper 
second alternate adjacent channel to -35 dBm.

Characteristics:

*RST value: -200DBM
SCPI: device-specific

Mode:

A

Summary of Contents for R&S FSP Series





























































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands