Rohde & Schwarz R&S FSP Series, Operating Manual

Page: 244 / 796

R&S FSP Instrument Functions
Basic Settings
4.172 Operating Manual 1164.4556.12 - 06
Fig. 4.17 Linear frequency axis and linear interpolation
Fig. 4.18 Logarithmic frequency axis and interpolation
Comment - Entry of comment
Any comment with a maximum length of 50 characters can be entered.
Remote command:
CORR:TRAN:COMM <string>
INSERT LINE The INSERT LINE softkey inserts an empty line above the marked reference value.
When entering a new reference value in the line, the ascending order of frequencies
must be taken into consideration, however.
Remote command:
--
DELETE LINE The DELETE LINE softkey deletes the marked reference value (complete line). The
reference values that follow move one line up.
Remote command:
--
SAVE TRD
FACTOR
The SAVE TRD FACTOR softkey saves the changed table in a file on the internal
hard disk.
If there is already a transducer factor that has the same name, a confirmation query
is output.
If the new factor is active, the new values become immediately valid.
Remote command:
--
(executed automatically after the definition of the
reference values)
4.6.3.5 Programming the Interface Configuration and Time Setup
The GENERAL SETUP softkey opens a submenu in which the general instrument
parameters can be set up. In addition to the configuration of the digital interfaces
(
IECBUS, COM ), the date and time may be entered.
The current settings are displayed in tabular form on the display screen where they
may be edited.