Rohde & Schwarz R&S FSP Series, Operating Manual

Page: 778 / 796

R&S FSP Error Messages
SCPI-Specific Error Messages
9.4 Operating Manual 1164.4556.12 - 06
-114 Header suffix out of range
The header contains an invalid numeric suffix.
Example: SENSe3 does not exist in the instrument.
-120 Numeric data error
The command contains a faulty numeric parameter.
-121 Invalid character in number
A number contains an invalid character.
Example: An "A" in a decimal number or a "9" in an octal number.
-123 Exponent too large
The absolute value of the exponent is greater than 32000.
-124 Too many digits
The number includes too many digits.
-128 Numeric data not allowed
The command includes a number which is not allowed at this position.
Example: The command INPut:COUPling requires indication of a text parameter.
-130 Suffix error
The command contains a faulty suffix.
-131 Invalid suffix
The suffix is invalid for this instrument.
Example: nHz is not defined.
-134 Suffix too long
The suffix contains more than 12 characters.
-138 Suffix not allowed
A suffix is not allowed for this command or at this position of the command.
Example: The command *RCL does not permit a suffix to be indicated.
-140 Character data error
The command contains a faulty text parameter
-141 Invalid character data
The text parameter either contains an invalid character or it is invalid for this command.
Example: Write error with parameter indication; INPut:COUPling XC .
-144 Character data too long
The text parameter contains more than 12 characters.
-148 Character data not allowed
The text parameter is not allowed for this command or at this position of the command.
Example: The command *RCL requires a number to be indicated.
-150 String data error
The command contains a faulty string.
-151 Invalid string data
The command contains a faulty string.
Example: An END message has been received prior to the terminating apostrophe.
Error code Error text in the case of queue poll
Error explanation