Rohde & Schwarz R&S FSP Series, Operating Manual

Page: 699 / 796

Operating Manual 1164.4556.12 - 06 6.305
R&S FSP Remote Control – Description of Commands
Differences in GPIB Behavior between the FSP and the FSE Families of Instruments
FSET INPut<1|2>:PRESelection:COUPling:LOW:
FREQuency 10Hz to 5MHz not available for
R&S FSP
FSET INPut<1|2>:PRESelection:COUPling:LOW:SET 'name of preselector set
for low RBW' not available for
R&S FSP
FSET INPut<1|2>:PRESelection:COUPling:MID:SET 'name of preselector set
for medium RBW' not available for
R&S FSP
FSET INPut<1|2>:PRESelection:FILTer:HPASS[:
FREQuency] 100Hz to 5MHz not available for
R&S FSP
FSET INPut<1|2>:PRESelection:FILTer:LPASS[:
FREQuency] 20KHz to 40MHz not available for
R&S FSP
FSET INPut<1|2>:PRESelection:FILTer[:STATe] ON | OFF not available for
R&S FSP
FSET INPut<1|2>:PRESelection:SET NARRow | NORMal |
WIDE not available for
R&S FSP
FSET INPut<1|2>:PRESelection:USET[:SELect] 'name of user defined
preselector set' not available for
R&S FSP
FSET INPut<1|2>:PRESelection[:STATe] ON | OFF not available for
R&S FSP
FSET INPut<1|2>:TYPE RF | BALanced not available for
R&S FSP
ESIB INPut<1|2>:TYPE INPUT1 | INPUT2 not available for
R&S FSP
FSE INPut<1|2>:UPORt<1|2>:STATe ON | OFF not available for
R&S FSP
FSE INPut<1|2>:UPORt<1|2>[:VALue]? not available for
R&S FSP
ESIB INPut2:COUPling AC | DC not available for
R&S FSP
INSTrument:COUPle NONE | RLEVel | CF_B |
CF_A available coupling
modes between Screen
A and Screen B have
been changed between
FSE and R&S FSP
FSE INSTrument:COUPle NONE | MODE | X | Y |
CONTrol | XY |
XCONtrol | YCONtrol |
ALL Available coupling
modes between screen
A and screen B have
been changed between
FSE and R&S FSP
INSTrument<1|2>:NSELect 1 currently only parameter
value 1 available
ESIB INSTrument<1|2>:NSELect 1 to 3 | 6 4 parameter values are
available
FSE/
FSIQ INSTrument<1|2>:NSELect 1 to 5 5 parameter values are
available
FSET INSTrument<1|2>:NSELect 1 | 2 | 6 3 parameter values are
available
INSTrument<1|2>[:SELect] SANalyzer Currently only
SANalyzer available
Devices Command (Sheet 26 of 47) Parameter Notes