manualshive.com logo in svg

Infineon Technologies TC1784, User Manual

Share
Download
Infineon Technologies TC1784 User Manual Download Page 276

TC1784

System Control Unit (SCU)

 

User´s Manual

3-93

V1.1, 2011-05

32-bit SCU, V1.18

 

•

ERU_PDOUTy

 to directly output the pattern match information for gating purposes

in other modules (pattern match = 1).

•

ERU_GOUTy

 to output the pattern match or pattern miss information (inverted

pattern match), or a permanent 0 or 1 under software control for gating purposes in
other modules.

•

ERU_TOUTy

 as combination of a peripheral trigger, a pattern detection result

change event, or the ETLx trigger outputs TRxy to trigger actions in other modules.

•

ERU_IOUTy

 as gated trigger output (ERU_GOUTy logical AND-combined with

ERU_TOUTy) to trigger interrupts (e.g. the interrupt generation can be gated to allow
interrupt activation during a certain time window).

Trigger Combination

The trigger combination logically OR-combines different trigger inputs to form a common
trigger ERU_TOUTy. Possible trigger inputs are:
•

In each ETLx unit of the 

Input Channels

, the trigger output TRxy can be enabled and

the trigger event can be directed to one of the OGUy units.

•

In the case that at least one 

pattern detection

 input is enabled (IGCRm.IPENxy) and

a change of the pattern detection result from pattern match to pattern miss (or vice-
versa) is detected, a trigger event is generated to indicate a pattern detection result
event (if enabled by IGCRm.GEENy).

The trigger combination offers the possibility to program different trigger criteria for
several input signals (independently for each Input Channel) or peripheral signals, and
to combine their effects to a single output, e.g. to generate an interrupt or to start e.g. an
ADC conversion. This combination capability allows the generation of an interrupt per
OGU that can be triggered by several inputs (multitude of request sources -> one
reaction).

Pattern Detection

The pattern detection logic allows the combination of the status flags of all ETLx units.
Each status flag can be individually included or excluded from the pattern detection for
each OGUy, via control bits IGCRm.IPENxy. The pattern detection block outputs the
following pattern detection results:
•

Pattern match

 (PDRR.PDRy = 1 and ERU_PDOUTy = 1):

A pattern match is indicated while all status flags that are included in the pattern
detection are 1.

•

Pattern miss

 (PDRR.PDRy = 0 and ERU_PDOUTy = 0):

A pattern miss is indicated while at least one of the status flags that are included in
the pattern detection is 0.

In addition, the pattern detection can deliver a trigger event if the pattern detection result
changes from match to miss or vice-versa (if enabled by IGCRm.GEENy = 1). The
pattern result change event is logically OR-combined with the other enabled trigger

Summary of Contents for TC1784















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands