manualshive.com logo in svg

Infineon Technologies TC1784, User Manual

Share
Download
Infineon Technologies TC1784 User Manual Download Page 2111

TC1784

Analog to Digital Converter (ADC)

 

User´s Manual

23-5

V1.1, 2011-05

ADC, V1.3

 

23.1.4

ADC Kernel Overview

Each ADC kernel comprises:
•

An 

analog to digital converter

 with a maximum of 16 analog inputs (CH0 - CH15).

This block selects an input signal and translates the analog voltage into a digital
value.
Not all analog input channels are necessarily available in all packages, please refer
to the implementation description in 

Section 23.3

.

•

A 

conversion control

 unit defining the conversion parameters like the length of the

sample phase, the resolution and the reference for each conversion. The length of
the sample phase and the resolution depend on the type of sensor (or other analog
sources) connected to the ADC. These values are similar for several channels and,
therefore, are grouped together to form the so-called input classes. Each channel can
be individually assigned to an input class to define these parameters.
The conversion control also handles the start conditions for the conversions, such as
the immediate start (cancel-inject-repeat), overwrite of former results (wait-for-read),
or synchronization of the ADC kernels (parallel conversions).
Additionally, an external analog multiplexer can be controlled by the output signals
EMUX[2:0] of each ADC kernel.

•

A 

request control

 unit defining which analog input channel has to be converted next.

It contains 5 request sources that can trigger conversions depending on different
events, such as edges of PWM or timer signals or events at port pins. Each request
source can trigger either 1, up to 4, or up to 16 conversions in a sequence.

•

A 

result handling

 unit providing 16 result registers for the conversion results. The

conversion result of each analog input channel can be directed to one of the result
registers to be stored there. The result handling block also supports data reduction
(e.g. for digital anti-aliasing filtering) by automatically adding up to 4 conversion
results before informing the CPU that new data is available.
Additionally, the results registers can be concatenated to FIFO structures to provide
storage capability for more than one conversion result without overwriting previous
data. This feature also helps to handle CPU latency effects.

•

An 

interrupt generation

 unit issuing interrupt requests to the CPU depending on

ADC events. The interrupt generation in the ADC kernels support different
mechanisms, e.g. some interrupts can be coupled to a value range of the conversion
result (limit checking), some interrupts can be used to transport conversion data to
locations in memory for further treatment, and other interrupts are generated after a
complete sequence of conversions.

Summary of Contents for TC1784















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands