Dell Force10 S4810P, Справочное руководство

Страница: 425 / 1637

The following describes the
show ip bgp neighbors
command shown in the Examples
below.
The Lines Beginning
with: Description
BGP neighbor Displays the BGP neighbor address and its AS number. The last
phrase in the line indicates whether the link between the BGP router
and its neighbor is an external or internal one. If they are located in
the same AS, the link is internal; otherwise the link is external.
BGP version Displays the BGP version (always version 4) and the remote router
ID.
BGP state Displays the neighbor’s BGP state and the amount of time in
hours:minutes:seconds it has been in that state.
Last read This line displays the following information:
• last read is the time (hours:minutes:seconds) the router read
a message from its neighbor
• hold time is the number of seconds configured between
messages from its neighbor
• keepalive interval is the number of seconds between
keepalive messages to help ensure that the TCP session is
still alive.
Received messages This line displays the number of BGP messages received, the
number of notifications (error messages), and the number of
messages waiting in a queue for processing.
Sent messages The line displays the number of BGP messages sent, the number of
notifications (error messages), and the number of messages waiting
in a queue for processing.
Received updates This line displays the number of BGP updates received and sent.
Soft reconfiguration This line indicates that soft reconfiguration inbound is configured.
Minimum time Displays the minimum time, in seconds, between advertisements.
(list of inbound and
outbound policies) Displays the policy commands configured and the names of the
Route map, AS-PATH ACL, or Prefix list configured for the policy.
For address family: Displays the IPv4 Unicast as the address family.
BGP table version Displays which version of the primary BGP routing table the router
and the neighbor are using.
accepted prefixes Displays the number of network prefixes accepted by the router and
the amount of memory used to process those prefixes.
Prefix advertised Displays the number of network prefixes advertised, the number
rejected, and the number withdrawn from the BGP routing table.
Connections
established Displays the number of TCP connections established and dropped
between the two peers to exchange BGP information.
425