Dell Force10 S4810P, Справочное руководство

Страница: 1317 / 1637

set-ip-dscp
value
(OPTIONAL) Enter the keywords
set-ip-dscp
followed by the IP
DSCP value. The matched traffic is marked with the DSCP value. The
range is 0 to 63.
NOTE: This option is not supported on S-Series.
Defaults none
Command Modes CLASS-MAP CONFIGURATION (config-class-map)
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.7.1.0 Added the keyword
multicast
. Added the
DSCP Marking
option support on the S-Series.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series. Added support for the
DSCP Marking
option.
Version 6.2.1.1 Introduced on the E-Series.
Usage
Information
You must enter the
class-map
command in order to access this command. After the class
map is identified, you can configure the match criteria.
The
match ip dscp
and
match ip precedence
commands are mutually exclusive.
Up to 64 IP DSCP values can be matched in one match statement. For example, to indicate IP
DCSP values 0 1 2 3 4 5 6 7, enter either the
match ip dscp 0,1,2,3,4,5,6,7
or
match ip dscp 0-7
command.
NOTE: Only one of the IP DSCP values must be a successful match criterion, not all of the
specified IP DSCP values need to match.
Related
Commands class-map – identifies the class map.
match ip precedence
Use IP precedence values as a match criteria.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax match ip precedence ip- precedence-list [[multicast] set-ip-dscp
value ]
To remove IP precedence as a match criteria, use the
no match ip precedence ip-
precedence-list [[multicast] set-ip-dscp value ]
command.
Parameters
ip-precedence-
list
Enter the IP precedence value(s) as the match criteria. Separate
values by commas — no spaces ( 1,2,3 ) or indicate a list of values
separated by a hyphen (1-3). The range is 0 to 7.
1317