manualshive.com logo in svg

Dell Force10 S4810P, Справочное руководство

Поделиться
Скачать
Dell Force10 S4810P Скачать руководство пользователя страница 1058

pre-Version 
6.2.1.1

Introduced on the E-Series.

Usage 
Information

When this command is configured, the VLAN is operationally UP if any of the interfaces 
specified in the 

track ip

 command are operationally UP, and the VLAN is operationally 

DOWN if none of the tracking interfaces are operationally UP.
If the 

track ip

 command is not configured, the VLAN's Layer 3 operational state depends 

on all the members of the VLAN.
The Layer 2 state of the VLAN, and hence the Layer 2 traffic, is not affected by the 

track ip 

command configuration.

Related 
Commands

interface vlan

 – configures a VLAN.

tagged

 – specifies which interfaces in a VLAN are tagged.

untagged

Add a Layer 2 interface to a VLAN as an untagged interface.

C-Series, E-Series, S-Series, Z-Series, S4810

Syntax

untagged 

interface

To remove an untagged interface from a VLAN, use the 

no untagged 

interface 

command.

Parameters

interface

Enter the following keywords and slot/port or number information:

•

For a 1-Gigabit Ethernet interface, enter the keyword 

GigabitEthernet

 followed by the slot/port information.

•

For a Port Channel interface, enter the keywords 

port-

channel

 followed by a number. For the C-Series and S-

Series, the range is 1 to 128. For the E-Series, the range is 1 to 

255 for TeraScale and 1 to 512 for ExaScale.

•

For a 10-Gigabit Ethernet interface, enter the keyword 

TenGigabitEthernet

 followed by the slot/port 

information.

•

For a 40-Gigabit Ethernet interface, enter the keyword 

fortyGigE

 followed by the slot/port information.

Defaults

All interfaces in Layer 2 mode are untagged.

Command Modes

INTERFACE VLAN

Command History

Version 8.3.11.1

Introduced on the Z9000.

Version 8.5.1.0

Added support for 4-port 40G line cards on ExaScale.

Version 8.3.7.0

Introduced on the S4810.

Version 7.6.1.0

Introduced on the S-Series.

Version 7.5.1.0

Introduced on the C-Series.

1058

Содержание Force10 S4810P






































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды