Dell Force10 S4810P, Справочное руководство

Страница: 1625 / 1637

Version 8.3.8.0 Introduced on the S4810.
Usage
Information
This command applies to a single interface. When used in conjunction with the
vrrp delay
reload
CLI, the later timer rules the VRRP enabling. For example, if
vrrp delay reload
is 600 and the
vrrp delay minimum
is 300:
• When the system reloads, VRRP waits 600 seconds (10 minutes) to bring up VRRP on all
interfaces that are up and configured for VRRP.
• When an interface comes up, whether as part of a system reload or an interface
reload, the system waits 300 seconds (5 minutes) to bring up VRRP on that interface.
Related
Command vrrp delay reload – sets the delay time for VRRP initialization after a system reboot.
vrrp delay reload
Set the delay time for VRRP initialization after a system reboot.
Z-Series, S4810
Syntax vrrp delay reload seconds
Parameters
seconds
Enter the number of seconds for the delay. The range is 0 to 900 (0
indicates no delay).
Defaults 0
Command Modes INTERFACE
Command History
Version 9.0.0.0 Introduced on the Z9000.
Version 8.3.8.0 Introduced on the S4810.
Usage
Information
This command applies to all the VRRP configured interfaces on a system. When used in
conjunction with the
vrrp delay minimum
CLI, the later timer rules the VRRP enabling.
For example, if
vrrp delay reload
is 600 and the
vrrp delay minimum
is 300:
• When the system reloads, VRRP waits 600 seconds (10 minutes) to bring up VRRP on all
interfaces that are up and configured for VRRP.
• When an interface comes up, whether as part of a system reload or an interface
reload, the system waits 300 seconds (5 minutes) to bring up VRRP on that interface.
You must save the configuration and reload the system for the delay timers to take effect.
Related
Command vrrp delay minimum – sets the delay time for VRRP initialization after a line card reboot.
1625