Dell Force10 S4810P, Справочное руководство

Страница: 884 / 1637

• For a Port Channel interface, enter the keywords
port-
channel
followed by a number. For the C-Series and S-
Series, the range is 1 to 128. For the E-Series, the range is 1 to
255 for TeraScale and 1 to 512 for ExaScale.
• For a SONET interface, enter the keyword
sonet
followed by
the slot/ port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
followed by the slot/port
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
followed by the slot/port information.
(OPTIONAL) Enter an
in
or
out
parameter in conjunction
with the optional interface.
• For a VLAN, enter the keyword
vlan
followed by a number
from 1 to 4094.
brief (OPTIONAL) Enter the keyword
brief
to view a brief summary of the
interfaces and whether an IP address is assigned.
linecard
slot-
number
(OPTIONAL) Enter the keyword
linecard
followed by the number
of the line card slot. For the C-Series, the range is 0-7. For the E-
Series, the range is 0 to 13 on a E1200/1200i, 0 to 6 on a E600/E600i,
and 0 to 5 on a E300.
NOTE: This keyword is not available on the S-Series.
configuration (OPTIONAL) Enter the keyword
configuration
to display the
physical interfaces with non-default configurations only.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
Version 8.3.7.0 Introduced on the S4810.
Version 8.1.1.2 Supported on the E-Series ExaScale E600i.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.0 Introduced on the E-Series.
Usage
Information The following describes the
show ip interface
command shown in the Example below.
884