manualshive.com logo in svg

Dell Force10 S4810P, Справочное руководство

Поделиться
Скачать
Dell Force10 S4810P Скачать руководство пользователя страница 235

•

CONFIGURATION-EXTENDED-ACCESS-LIST

•

CONFIGURATION-MAC ACCESS LIST-STANDARD

•

CONFIGURATION-MAC ACCESS LIST-EXTENDED

Command History

Version 8.3.11.1

Introduced on the Z9000.

Version 8.3.7.0

Introduced on the S4810.

Version 8.1.1.0

Introduced on the E-Series ExaScale.

Version 7.6.1.0

Introduced on the S-Series.

Version 7.5.1.0

Introduced on the C-Series.

pre-Version 
6.2.1.1

Introduced on the E-Series.

Example

FTOS(config-ext-nacl)#show conf

!

ip access-list extended patches

FTOS(config-ext-nacl)#

Common IP ACL Commands

The following commands are available within both IP ACL modes (Standard and Extended) and do not have mode-
specific options. When an ACL is created without a rule and then is applied to an interface, ACL behavior reflects an 
implicit permit.
C-Series and S-Series (non-S4810) platforms support Ingress IP ACLs only.
The S4810 and Z-Series support both Ingress and Egress IP ACLs.

NOTE: Also refer to the 

Commands Common to all ACL Types

 section.

access-class

Apply a standard ACL to a terminal line.

C-Series, E-Series, S-Series, Z-Series, S4810

Syntax

access-class 

access-list-name

To remove an ACL, use the 

no access-class 

access-list-name

 command.

Parameters

access-list-name

Enter the name of a configured Standard ACL, up to 140 characters.

Defaults

Not configured.

Command Modes

LINE

Command History

Version 8.3.11.1

Introduced on the Z9000.

Version 8.3.7.0

Introduced on the S4810.

235

Содержание Force10 S4810P






































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды