Dell Force10 S4810P, Справочное руководство

Страница: 1163 / 1637

pre-Version
6.1.1.1 Introduced on the E-Series.
Usage
Information All neighboring routers in the same network must use the same password to exchange OSPF
information.
ip ospf cost
Change the cost associated with the OSPF traffic on an interface.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax ip ospf cost cost
To return to default value, use the
no ip ospf cost
command.
Parameters
cost
Enter a number as the cost. The range is 1 to 65535.
Defaults The default cost is based on the reference bandwidth.
Command Modes INTERFACE
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.1 Introduced on the E-Series.
Usage
Information
If this command is not configured, cost is based on the
auto-cost
command.
When you configure OSPF over multiple vendors, use the
ip ospf cost
command to
ensure that all routers use the same cost. Otherwise, OSPF routes improperly.
Related
Commands auto-cost – controls how the OSPF interface cost is calculated.
1163