Dell Force10 S4810P, Справочное руководство

Страница: 1240 / 1637

To remove the access list, use the
no ip pim join-filter ext-access-list
{in | out}
command.
Parameters
ext-access-list
Enter the name of an extended access list.
in Enter this keyword to apply the access list to inbound traffic.
out Enter this keyword to apply the access list to outbound traffic.
Defaults none
Command Modes INTERFACE
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.8.1.0 Introduced on the C-Series for the port-channels and the S-Series.
Version 7.7.1.0 Introduced on the E-Series.
Example
FTOS(conf)# ip access-list extended iptv-channels
FTOS(config-ext-nacl)# permit ip 10.1.2.3/24 225.1.1.0/24
FTOS(config-ext-nacl)# permit ip any 232.1.1.0/24
FTOS(config-ext-nacl)# permit ip 100.1.1.0/16 any
FTOS(config-if-gi-1/1)# ip pim join-filter iptv-channels in
FTOS(config-if-gi-1/1)# ip pim join-filter iptv-channels out
Related
Commands ip access-list extended – configure an access list based on IP addresses or protocols.
ip pim ingress-interface-map
When the Dell Force10 system is the RP, statically map potential incoming interfaces to (*,G) entries to create a lossless
multicast forwarding environment.
C-Series, E-Series, S-Series, S4810
Syntax ip pim ingress-interface-map std-access-list
Parameters
std-access-list Enter the name of an standard access list.
Defaults none
Command Modes INTERFACE
Command History
Version 8.3.12.0 Introduced on the S4810.
Version 8.4.1.0 Introduced
Example
FTOS(conf)# ip access-list standard map1
FTOS(config-std-nacl)# permit 224.0.0.1/24
FTOS(config-std-nacl)#exit
1240