Dell Force10 S4810P, Справочное руководство

Страница: 1540 / 1637

bpdu-destination-mac-address
Use the Provider Bridge Group address in Spanning Tree or GVRP PDUs.
C-Series, S-Series, S4810
Syntax bpdu-destination-mac-address [stp | gvrp] provider-bridge-group
Parameters
xstp Force STP, RSTP, and MSTP to use the Provider Bridge Group
address as the destination MAC address in its BPDUs.
gvrp Forces GVRP to use the Provider Bridge GVRP Address as the
destination MAC address in its PDUs.
Defaults The destination MAC address for BPDUs is the Bridge Group Address.
Command Modes CONFIGURATION
Command History
Version 8.3.11.1 Introduced on the S4810.
Version 8.2.1.0 Introduced on the C-Series and S-Series.
debug spanning-tree
Enable debugging of the spanning tree protocol and view information on the protocol.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax debug spanning-tree { stp-id [all | bpdu | config | events |
exceptions | general | root] | protocol }
To disable debugging, use the
no debug spanning-tree
command.
Parameters
stp-id
Enter zero (0). The switch supports one spanning tree group with a
group ID of 0.
protocol
Enter the keyword for the type of STP to debug, either
mstp
,
pvst
,
or
rstp
.
all (OPTIONAL) Enter the keyword
all
to debug all spanning tree
operations.
bpdu (OPTIONAL) Enter the keyword
bpdu
to debug bridge protocol data
units.
config (OPTIONAL) Enter the keyword
config
to debug configuration
information.
events (OPTIONAL) Enter the keyword
events
to debug STP events.
1540