Dell Force10 S4810P, Справочное руководство

Страница: 1065 / 1637

• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
followed by the slot/port
information.
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet
followed by the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
followed by the slot/ port information.
Command Modes
• EXEC
• EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.12.0 Introduced on the S4810.
Legacy E-Series
command.
Usage
Information The following describes the
show fefd
command shown in the Example below.
Field Description
Interface Displays the interfaces type and number.
Mode Displays the mode (aggressive or normal) or NA if the interface
contains
fefd reset
in its configuration.
Interval Displays the interval between FEFD packets.
State Displays the state of the interface and can be one of the following:
• bi-directional (interface is up and connected and ing
neighbor’s echoes).
• err-disabled (only found when the FEFD mode is aggressive
and when the interface has not n its neighbor’s echoes for 3
times the message interval. To reset an interface in this
state, use the
fefd reset
command.)
• unknown (only found when FEFD mode is normal.
• locally disabled (interface contains the
fefd reset
command in its configuration).
• Admin Shutdown (interface is disabled with the
shutdown
command).
Example
FTOS#sh fefd
FEFD is globally 'ON', interval is 10 seconds, mode is
'Aggressive'.
INTERFACE MODE INTERVAL STATE
(second)
Gi 5/0 Aggressive 10 Admin Shutdown
Gi 5/1 Aggressive 10 Admin Shutdown
Gi 5/2 Aggressive 10 Admin Shutdown
Gi 5/3 Aggressive 10 Admin Shutdown
Gi 5/4 Aggressive 10 Admin Shutdown
1065