Dell Force10 S4810P, Справочное руководство

Страница: 1074 / 1637

mode
Set LLDP to receive or transmit.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax mode {tx | rx}
To return to the default, use the
no mode {tx | rx}
command.
Parameters
tx Enter the keyword
tx
to set the mode to transmit.
rx Enter the keyword
rx
to set the mode to receive.
Defaults Both transmit and receive.
Command Modes CONFIGURATION (conf-lldp) and INTERFACE (conf-if-
interface
-lldp)
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.7.1.0 Introduced on the S-Series.
Version 7.6.1.0 Introduced on the C-Series.
Version 7.4.1.0 Introduced on the E-Series.
Related
Commands
protocol lldp (Configuration) – enables LLDP globally.
show lldp neighbors – displays the LLDP neighbors.
multiplier
Set the number of consecutive misses before LLDP declares the interface dead.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax multiplier integer
To return to the default, use the
no multiplier integer
command.
Parameters
integer
Enter the number of consecutive misses before the LLDP declares the
interface dead. The range is 2 to 10.
Defaults 4 x hello
Command Modes CONFIGURATION (conf-lldp) and INTERFACE (conf-if-
interface
-lldp)
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.7.1.0 Introduced on the S-Series.
Version 7.6.1.0 Introduced on the C-Series.
1074