Dell Force10 S4810P, Справочное руководство

Страница: 689 / 1637

18
FIP Snooping
The following Dell Force10 operating software (FTOS) commands are used to configure and verify the FIP snooping
feature on the S4810 and MXL Switch platforms.
In a converged Ethernet network, an MXL switch can operate as an intermediate Ethernet bridge to snoop on Fibre
Channel over Ethernet initialization protocol (FIP) packets during the login process on Fibre Channel over Ethernet (FCoE)
forwarders (FCFs). Acting as a transit FIP snooping bridge, the switch uses dynamically created access control lists
(ACLs) to permit only authorized FCoE traffic to transmit between an FCoE end-device and an FCF.
clear fip-snooping database interface vlan
Clear FIP snooping information on a VLAN for a specified FCoE MAC address, ENode MAC address, or FCF MAC
address, and remove the corresponding ACLs generated by FIP snooping.
S4810 and MXL Switch
Syntax clear fip-snooping database interface vlan { vlan-id } enode
{ enode-mac-address } | fcf { fcf-mac-address } | session { session-
mac-address }
Parameters
enode-mac-
address
Enter the ENode MAC address to be cleared of FIP snooping
information.
fcf-mac-address
Enter the FCF MAC address to be cleared of FIP snooping information.
session-mac-
address
Enter the MAC address for the session to be cleared of FIP snooping
information.
Command Modes EXEC Privilege
Command History
Version 8.3.12.0 Introduced on the S4810.
Version 8.3.16.0 Introduced on the MXL 10/40GbE Switch IO Module.
689