Dell Force10 S4810P, Справочное руководство

Страница: 708 / 1637

member-vlan
Specify the member VLAN identification numbers.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax member-vlan { vlan-range }
To return to the default, use the
no member-vlan [ vlan-range ]
command.
Parameters
vlan-range
Enter the member VLANs using VLAN IDs (separated by commas), a
range of VLAN IDs (separated by a hyphen), a single VLAN ID, or a
combination. For example: VLAN IDs (comma-separated): 3, 4, 6.
Range (hyphen-separated): 5-10. Combination: 3, 4, 5-10, 8.
Defaults none
Command Modes CONFIGURATION (conf-frrp)
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.2.1.0 Introduced on the C-Series.
Version 7.4.1.0 Introduced.
mode
Set the Master or Transit mode of the ring.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax mode {master | transit}
To reset the mode, use the
no mode {master | transit}
command.
Parameters
master Enter the keyword
master
to set the Ring node to Master mode.
transit Enter the keyword
transit
to set the Ring node to Transit mode.
Defaults Mode None
Command Modes CONFIGURATION (conf-frrp)
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.2.1.0 Introduced on the C-Series.
708