Dell Force10 S4810P, Справочное руководство

Страница: 547 / 1637

maximum
Enter a number as the maximum number of prefixes allowed for this
BGP router. The range is 1 to 4294967295.
threshold
(OPTIONAL) Enter a number to be used as a percentage of the
maximum value. When the number of prefixes reaches this
percentage of the maximum value, the E-Series software sends a
message. The range is 1 to 100 percent. The default is 75.
warning-only (OPTIONAL) Enter the keywords
warning-only
to set the router to
send a log message when the maximum value is reached. If you do
not set this parameter, the router stops peering when the maximum
number of prefixes is reached.
Defaults
threshold
= 75
Command Modes ROUTER BGPV6-ADDRESS FAMILY
Command History
Version 7.4.1.0 Introduced
neighbor next-hop-self
Allows you to configure the router as the next hop for a BGP neighbor.
E-Series
Syntax neighbor { ipv6-address | peer-group-name } next-hop-self
To return to the default setting, use the
no neighbor { ipv6-address | peer-
group-name } next-hop-self
command.
Parameters
ipv6-address Enter the IPv6 address in the x:x:x:x::x format.
NOTE: The :: notation specifies successive hexadecimal fields of
zeros.
peer-group-name (OPTIONAL) Enter the name of the peer group.
Defaults Disabled.
Command Modes ROUTER BGPV6-ADDRESS FAMILY
Command History
Version 7.4.1.0 Introduced
Usage
Information If you configure the
set ipv6 next-hop
command in ROUTE-MAP mode, its
configuration takes precedence over the
neighbor next-hop-self (C-, E-, and
S-Series)
command.
547