Dell Force10 S4810P, Справочное руководство

Страница: 843 / 1637

cp (OPTIONAL) Enter the
cp
to clear only statistics from the Control
Processor.
rp1 (OPTIONAL) Enter the keyword
rp1
to clear only the statistics from
Route Processor 1.
rp2 (OPTIONAL) Enter the keyword
rp2
to clear only the statistics from
Route Processor 2.
Command Modes EXEC Privilege
Command History
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.2.1.1 Introduced on the E-Series.
debug arp
View information on ARP transactions.
C-Series, E-Series, S-Series, Z-Series, S4810
Syntax debug arp [ interface ] [count value ]
To stop debugging ARP transactions, use the
no debug arp
command.
Parameters
interface
(OPTIONAL) Enter the following keywords and slot/port or number
information:
• For a 1-Gigabit Ethernet interface, enter the keyword
GigabitEthernet
followed by the slot/port information.
• For the Management interface, enter the keyword
ManagementEthernet
followed by the slot/port
information. The slot range is 0 to 1 and the port range is 0.
• For a Port Channel interface, enter the keywords
port-
channel
followed by a number. For the C-Series and S-
Series, the range is 1 to 128. For the E-Series, the range is 1 to
255 for TeraScale and 1 to 512 for ExaScale.
• For a SONET interface, enter the keyword
sonet
followed by
the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
followed by the slot/port
information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE
followed by the slot/port information.
843